Wood Look Tiles for Wholesale and Export Wood effect ceramic floor tiles in 40x40 and 60x60

A wood-grain floor that does not swell with water or need sealing.

The Khatam 40x40 is 15 mm thick: a strong floor for busy homes.

Matt is closest to real wood and suits floors that may get wet.

Ceramic wood look usually costs less per square metre than a wooden floor.

Living Rooms and Bedrooms

A warm floor in matt 40x40 or 60x60.

Kitchens

A wood look that does not mind water, in matt.

Busy Homes

The thick 15 mm 40x40 for heavy daily use.

Cafes and Small Shops

A warm floor at a low price per m².

• Export catalogue and per-model datasheets
• Sample boxes before a bulk order
• Full and mixed container or truck loads
• Distributor and project pricing on volume

• Commercial invoice
• Packing list
• Certificate of origin
• Bill of lading
• Technical datasheet per model

Available sizes are listed in the Technical Specifications section above. The products page shows exactly which sizes and designs are in current production today.

Available finishes are listed in the Finishes & Designs section above, in selected models. Ask the desk to confirm which codes carry the finish and colourway you need before the order is placed.

The figure is taken from each model datasheet and is not published as a single number for the whole body, since it varies by model.

MOQ depends on the model, the design, the production plan, the packing and the destination. Send the requirement through the quotation form and the desk replies with the applicable minimum.

The quantity depends on the pieces per carton, the thickness and the model. It is printed on the packing list attached to every quotation.

Yes to all three. The catalogue and datasheets are sent as PDFs, and sample boxes are dispatched on request — the desk states the preparation time and freight arrangement for your destination.

Yes, direct from the producing factories. Minimum order quantity is set per model and destination and is stated on the quotation. A proforma invoice is issued once the models, quantity, destination and incoterm are confirmed.

IRBUILD ships from Iran to thirty-five countries. Routes are road, rail or sea through Bandar Abbas; the desk confirms the available route, documents and delivery terms for a given destination.

It depends on each model reaching its own MOQ, on the container capacity and payload, and on the production schedule. Mixed loading is confirmed before the proforma invoice is issued.

Commercial invoice, packing list, certificate of origin, bill of lading and the technical datasheet. Any additional certificate is confirmed case by case before shipment.

EXW, FOB, CFR and CIF are quoted where the route to the destination supports them. The desk confirms which terms and which route apply to your market.

Private label and OEM production are discussed case by case. Feasibility, minimum quantity, carton artwork, lead time and brand requirements are confirmed with the factory before an order is accepted.

Ceramic tiles printed with a wood-grain design. They look like wood but are tile: they do not swell with water and need no sealing.

40x40 (white body, 15 mm, from our Khatam factory) and 60x60 (red body, 10 mm), plus one 30x90 wall model. We do not make plank sizes at present.

No. Our wood look tiles are white body and red body ceramic. For porcelain floors, see our stone and marble designs.

About 860 m² of 40x40 (15 mm) or about 1,300 m² of 60x60 red body per truck or 20 ft container.